510 sqm Scaffolding by Plettac Assco – steel frames & timber decks

Included parts

Scaffolding by Plettac Assco – 510 sqm incl. steel frames & timber decks

• frame scaffolding made in germany
• timber decks 2,50 m
• galvanized steel
• used but good condition
• easy to erect and dismantle
• for facades & construction
• additional parts on request
• worldwide shipping
• on stock

For further information, shipping or additional parts use our eMail-service please.

Assambling

The components can be assembled quickly and easily: Put two vertical frames on two scaffold feet. Now connect the vertical frames with at least one back railing. Now align the scaffold field vertically with a diagonal. To do this, simply slide the ends of the diagonals over the tilt fingers on the outside of the vertical frame. With the Plettac-SL scaffolding, this requires diagonal fastening in the lowest diagonal field. Finally, hang one and then a second wooden floor over the pins on the upper ends of the two vertical frames. How to continue with the other scaffolding fields. You can either block the diagonals one above the other in a tower; alternatively, you can distribute them diagonally in adjacent fields over the scaffold. Plettac wooden floors can be used on both sides and are easy to clean after use.